More Filters
This offering is for a Single Rear Antenna kit. It will fit the trunk lid or mount on a contoured fender[slight slope].. It will fit cars that are Made from The 1949-thru- 1969 Chevrolets Fords Buicks Studebakers Ramblers Oldsmobile Chrysler Dodge Plymouths Thunderbirds AMC AMX Mercury Lincoln Cadillac Chevelle Corvair Chevy 2 Galaxie Mustang Camaro's. Any car that used a rear Mount antennna on...
This is a real nice Stainless steel Radio antenna from WARD antenna co. The BIG leadin coax is 55" long and the mast is a 3 Section with a spring back and will never break .{ Import antennas always have small leadin coax.} Has chrome ball base and chrome ball tip. This antenna can be mounted on top of the fender or on the SIDE of the Fender, or bumper rear.. You get it your way. Antenna is new ...
This antenna is MUSTANG Radio antenna kit.Shelby, GT 300 ect It has a PM-300 on the antenna body next to where the coax attaches to the antenna body. It has the CHROME antenna BEZEL with a Chrome cap NUT with Rubber fender seal . I has a 3 section Heavy Chrome over brass antenna mast with a CHROME Spear antenna tip. It comes with a lower bracket and brace strap with clip and screw. 12' leadin c...
This antenna is For a 1939-49 Chevrolet Hudson Buick Studebaker Caddy Oldsmobile Humpmobile FORD and others Side mount radio antenna. This antenna is New in Box and has never been installed . . It has a perfect 3 section Chrome mast as is the antenna base and chrome base .[ The Black part of the base is not plastic, but CERAMIC or Glass Pottery ??l Shines ] The gasket is soft and supple.. . It ...
This is a vintage all Tripple Chrome antenna. It is brand new. It fits a 63--64 FORD Galaxie CAR .(new old replacement stock) Any questions e-mail me before you bid. I found these in a town down in Ga. Happy biding!!! Email for Questions before you bid!!;. Look at picture and bid accordingly. This antenna was made back in the 60's by WARD antenna co which is out of business . The . Lead in is 3...
This antenna is For a 1961-1962 FORD FALCON front fender radio antenna. Also fits Mercury cars 1961-62 Commet . and will also fit a 1955,56 Ford Cars,[have one on my 55 Custom] and 57 Ford Thunderbird. ect.. It has a perfect Chrome mast and is the antenna base and chrome cap nut.[MY pictures looks bad ].Your antenna may have some [shelf wear as Never installed . The gasket is soft and supple.. ...
This is a 1957 Ford Fairlane front Fender Radio antenna . It is New and has never been installed. The Chrome is perfect as is the 3 section Heavy chrome antenna mast with BIG chrome ball. The black top is perfect and shinny. Has BIG leadin coax. The chrome bezel is great and No pits at all. You will be proud to have this antenna for that 57 Ford Restoration. Questions before you buy as I want a...
196o Ford Galaxie and Streamliner . This antenna was made in America and is a AUTOMATIC Radio antenna and is USA Made. Very HIGH QUALITY ANTENNA . Look at the BIG leadin coax 48"s . [REMEMBER!! IMPORT antennas have small coax.] This is BIG coax with a 1/2" body plug. The antenna is a 3 section Heavy chrome over brass. Mast is 21"'s and extends to 56"'s Antenna is a little dusty,but will clean u...
This is a real nice Stainless steel Radio antenna from WARD antenna co. The BIG leadin coax is 48"'s long, NOT like SMALL coax IMPORTS ANTENNAS SOLD IN AMERICA and the mast is a single stage with a spring back and will never break. Has chrome ball base and chrome ball tip. This antenna can be mounted on top of the fender or on the SIDE of the Fender. You get it your way. Antenna is new ,America...
This is a real nice Chrome Radio antenna from WARD antenna co. The BIG leadin coax is 48"'s long, NOT like SMALL coax IMPORTS ANTENNAS SOLD IN AMERICA and the mast is a 2 section stage with a spring back and will never break. Has chrome ball base and chrome ball tip. This antenna can be mounted on top of the fender or on the SIDE of the Fender. You get it your way. Antenna is new ,American Made...
This is a real nice Stainless steel Radio antenna from WARD antenna co. The BIG leadin coax is 48"'s long { Import antennas always have Small leadin coax } and the mast is a 3 stage with a spring back and will never break. Has chrome ball base and chrome ball tip. This antenna can be mounted on top of the fender or on the SIDE of the Fender. You get it your way. Antenna is new ,American Made an...
This is a real nice CHROME Radio antenna from ROBERK antenna co. The BIG leadin coax is 48"'s long { Import antennas always have Small leadin coax } and the mast is a 3 section with a. chrome ball base and chrome ball tip. This antenna can be mounted on top of the fender or on the SIDE of the Fender. You get it your way. Antenna is new ,American Made and is over 40 years old . Never installed. ...
This is a NEW Pair of Dual rear Radio antennas. It has all you will need for a complete install, The antennas are 3 section heavy chrome over brass. The antennas are 22" lowered and extend to 48"s Chrome ball tips They lean back about 30 Degrees for that old cool look Hole is 7/8".. They have long coaxes 60"s I believe these antennas were made for old vintage PONTIAS Cars: However I do not know...
This is a Vintage WARD antenna PAIR. They have a Ruby Red semi-transparent Ball on the tip. The antennas will be great for those who have car covers. You can let the antenna all the way down to about 2" and extend the 3 section heavy chrome mast to 30" . The leadin coax is 48" and the tube extends under the fender 10 " . So check and see if you have the room for these great vintage Redball ante...
This is a 1948-1952 Ford Truck Radio antenna Kit ,[all new ] It is all Chrome , 3 section mast.. Other antennas sell for 100,s and up !! You will love this baby on your restoration. Three section mast that extends to 55" and lead in coax is 48" long. Thanks for looking at my old stuff!!! Look at the pictures and bid accordingly , any questions? Please e-mail me before you bid ,as all sales are ...
This is a NEW Pair of Dual rear Radio antennas. It has all you will need for a complete install, The antennas are 3 section stainless steel and will never rust. The antennas are 12" lowered and extend to 36"s Chrome ball tips They lean back about 30 Degrees for that old cool look Hole is 7/8".. They coaxes 36"s I believe these antennas were made for old vintage PONTIAS Cars: However I do not kn...
Several very similar results were not displayed. Show All
Similar
This auction is for a 1950's thru late 60's Vintage Car or truck replacement RADIO ANTENNA. It is a new Heavy stainless antenna that was made buy WARD Antenna co. [ AMERICAN MADE ] It is a 3 section mast 14" down 32" extended. SHORT I have a longer one in my store . The coax is 48"s long and is the BIG coax.The picture with the red ball tip is shown for coax plugin only. The RED Ball antenna do...
This antenna is for the 1966-67 Plymouth Belvedere Satalite Cornet Charger , Front Fender Radio antenna and is New as in NEVER installed on a car. It has a 3 section heavy triple chrome over brass mast that is 20" lowered and is 55"s fully extended. [I sell these chrome masts for 80.00 each] This antenna came from WARD antenna co Which made all the antennas for GM,Ford,and Chrysler [MOPAR] back...
This is one of the nicest ,and most beautiful Radio Antenna that I have . This antenna came from Tenna Antenna co. It comes in the original box with install sheet. The Antenna is from the 1940's thru 1950's. It is made from Heavy Chrome over Brass. It has a 3 section Chrome mast that lowers to 22" and extends to 57". It has a 7/16 Ruby Red Ball tip [semitransparent]. It has a 55" leadin coax an...
This is a MOTOROLA ROCKET RADIO antenna Kit . IT IS FOR MODELS 1930'S THRU 1950'S CARS AND TRUCKS . This is a very old antenna NEW in the Box.The antenna is show quality and is 3 section heavy chrome over brass. It also has a RUBY RED BALL TIP on it. It comes with a Woven leadin coax and is a beautiful radio antenna. It comes with 2 mounting brackets so as to mount in different places. One is f...
This Antenna will fit cars,and trucks all the way back to the 1930's thru 1940's. The antenna is a 4 section stainless steel and will never rust . It has a real nice BIG 48" leadin coax with a REDBALL tip on the side. It is 25"s lowered and extends to 7' 5" Old Studebakers were long like this . Chevrolet,Ford,Buick Oldsmobiles, Tuckers Hump mobiles Other 1930-140's Cars and trucks where you nee...
1930's thru 1940's Snyder Radio Antenna kit , NEW in The Box. This is one of the most quality made Vintage Radio Antenna kits that I have ever seen, It comes with all you will need for a complete install on that Vintage classic restoration. The antenna is Heavy Triple Chrome over brass..It is 32"'s all way down and extends to 96". The coax is a cloth woven type BIG coax 35"s Long and also has t...
This is a very rare [ I have never seen one ]PORCELAIN Radio antenna mounts from the 1930's thru 1940's side mount radio antenna. It is 24" long when collapsed and 58" when extended. The mast is a 3 section heavy chrome over brass. It has a leadin coax that is 33".s long. The 2 side mounts are ceramic and very beautiful. I have seen Bakelite and plastic, but not glass Ceramic . The Ceramic side...
This antenna is NEW Radio Antenna,and is Heavy Chrome over brass.. It is 22" down and extends to over 50"s" and has a 3 section Mast, and chrome ball tip. I sometimes sell the mast for 75.00. End of Summer sale as I only have 5 . .The leadin coax is over 52" long. This will fit the 49-69 Chevrolet ,Impala, Belair and Oldsmobile, Buicks, Studebaker, Trucks, Hudson, Fords, All Mopars , Dodge, Ply...
This antenna is For a 1930-49 Chevrolet Hudson Buick Studebaker Caddy Oldsmobile Humpmobile FORD and others Side mount radio antenna. Comes with red ball tip on the side. This antenna has never been installed . . It has a perfect 3 section Stainless steel mast as is the antenna base and chrome base . The gasket is soft and supple.. . It comes with a 36" BIG leadin coax and is in great shape.. H...
This is a very rare [ I have never seen one ]PORCELAIN Radio antenna mounts from the 1930's thru 1940's side mount radio antenna. It is 24" long when collapsed and 58" when extended. The mast is a 3 section heavy chrome over brass. It has a woven leadin coax that is 33".s long. The 2 side mounts are ceramic and very beautiful. I have seen Bakelite and plastic, but not glass Ceramic . This anten...
Your Listing Here
1 + ... Next >